...from Part 7
Step 6 :
Follow steps as in Workshop 3 to produce the development of the conical part as shown in figure below :
Summary of Workshop 4
In this workshop you have learnt :
1 How to create a cutout in a sheetmetal part.
2 How to unfold conical sheetmetal parts.
[ End of WorkShop 4 ]
Step 1 :
Open the Workshop5.psm sheetmetal file.
Get help from your lab instructor on how to open the file on your computer.
As you can see there is a sheetmetal part with a flange already prepared.
You will create a pattern of louvers on the flange.
Step 2 :
Click the Louver
command and select the front face of the flange as shown:
Step 3 :
Draw a line and click Finish
Step 4 :
Indicate the direction vertically upwards as shown below :
Type 7 and press <Enter> on the Keyboard. This is the depth of the louver.
Part 9...
Step 6 :
Follow steps as in Workshop 3 to produce the development of the conical part as shown in figure below :
Summary of Workshop 4
In this workshop you have learnt :
1 How to create a cutout in a sheetmetal part.
2 How to unfold conical sheetmetal parts.
[ End of WorkShop 4 ]
Workshop 5
Creating a pattern of louvers
Step 1 :
Open the Workshop5.psm sheetmetal file.
Get help from your lab instructor on how to open the file on your computer.
As you can see there is a sheetmetal part with a flange already prepared.
You will create a pattern of louvers on the flange.
Step 2 :
Click the Louver
command and select the front face of the flange as shown: 
Step 3 :
Draw a line and click Finish
Step 4 :
Indicate the direction vertically upwards as shown below :
Type 7 and press <Enter> on the Keyboard. This is the depth of the louver.
Part 9...
Solid Edge knowledge sharing, tutorials, videos, tips, CAD cartoons, SE crosswords, puzzles, games, SE events, SE job opportunities.
Keep yourself updated, contribute or just browse...
No comments:
Post a Comment